Sheet Metal Laser Cutting Types and Thickness

Laser cutting is a precise and versatile method used for cutting sheet metal. The maximum thickness that can be cut depends on several factors, including the type of metal, the laser’s power, and the quality of the cut required. Here are some general guidelines for laser cutting thickness:

Laser Types and Thickness Capabilities

  1. CO2 Lasers:
    • Mild Steel: Typically up to 25 mm (1 inch).
    • Stainless Steel: Up to 20 mm (0.79 inches).
    • Aluminum: Up to 15 mm (0.59 inches).
  2. Fiber Lasers:
    • Mild Steel: Up to 30 mm (1.18 inches).
    • Stainless Steel: Up to 25 mm (0.98 inches).
    • Aluminum: Up to 20 mm (0.79 inches).
  3. Nd

    Lasers:

    • Generally used for precision cutting and typically handle thinner materials than CO2 or fiber lasers.

Factors Affecting Cutting Thickness

  1. Laser Power: Higher wattage lasers can cut through thicker materials. For example, a 10 kW fiber laser can cut thicker materials compared to a 2 kW laser.
  2. Material Type: Different metals have varying properties that affect how they interact with laser cutting:
    • Mild Steel: Easier to cut due to lower reflectivity and higher absorption of laser energy.
    • Stainless Steel: Requires more power due to higher reflectivity.
    • Aluminum: Highly reflective and conductive, requiring more laser power and possibly specialized equipment.
  3. Cut Quality Requirements: Thicker materials can be cut, but the edge quality may degrade. For high-quality cuts, the maximum thickness might be lower.
  4. Assist Gas: The type and pressure of assist gas (such as oxygen, nitrogen, or air) can influence the cutting process and quality. For example, oxygen can increase cutting speed but may cause oxidation, while nitrogen provides a cleaner cut.

Typical Maximum Thickness by Laser Power

  • 2 kW Laser:
    • Mild Steel: Up to 15 mm (0.59 inches).
    • Stainless Steel: Up to 8 mm (0.31 inches).
    • Aluminum: Up to 6 mm (0.24 inches).
  • 4 kW Laser:
    • Mild Steel: Up to 20 mm (0.79 inches).
    • Stainless Steel: Up to 12 mm (0.47 inches).
    • Aluminum: Up to 10 mm (0.39 inches).
  • 6 kW Laser:
    • Mild Steel: Up to 25 mm (0.98 inches).
    • Stainless Steel: Up to 16 mm (0.63 inches).
    • Aluminum: Up to 12 mm (0.47 inches).
  • 10 kW Laser:
    • Mild Steel: Up to 30 mm (1.18 inches).
    • Stainless Steel: Up to 25 mm (0.98 inches).
    • Aluminum: Up to 20 mm (0.79 inches).

These are general guidelines, and specific capabilities can vary depending on the laser cutting machine and setup. It’s always best to consult with the laser cutting service provider to determine the exact capabilities for your specific material and thickness requirements.

china sheet metal fabrication manufacturers

sheet metal fabrication company china

china sheet metal fabrication companies

china sheet metal forming manufacturers

china sheet metal fabrication parts factory

china sheet metal fabrication parts manufacturer

china sheet metal fabrication factory

sheet metal parts manufacturing china

china metal enclosure manufacturers

china sheet metal fabrication supplier

china sheet metal fabrication services

china precision sheet metal fabricators

china custom sheet metal parts

china aluminum sheet metal fabrication manufacturers

china sheet metal parts company

china precision sheet metal manufacturer

china sheet metal enclosure fabrication

china sheet metal parts manufacturers

china metal stamping parts manufacturer

china sheet metal manufacturing manufacturers

china aluminium sheet metal fabrication supplier

Leave a Reply

Your email address will not be published. Required fields are marked *

© 2024 Sheet Metal Chassis - WordPress Theme by WPEnjoy